New Job Oportunity Conocophillips.Tbk Migas

As a Production Sharing Contractor for BPMIGAS, we operate many
producing and exploration blocks in Indonesia. To support our expanding
operations in Indonesia, ConocoPhillips is looking for talented
Indonesian nationals to fill in the following positions.

WARRANTY COORDINATOR




BASIC PURPOSE:

This position is to provide proper documentation with high technical English
writing as required to be attached in the system or equipment warranty
claim process.
Involve in developing proper documentation of
equipment history record to get clear path forward whether Ops repair
or project or vendors warranty issues whenever defect occurred.
Utilize
this position as a development opportunity to learn Engineering &
Operational requirements through all phases of the project up to
Operations start-up
Support & Implement the Eastern Hub Operations & Maintenance Philosophy
Be an active member and participant of the Project Management Team
Actively
participate to define Root Cause Failure of any defect parts or
equipment since Commissioning through Start-Up and handover of Projects
to Operations.
Influence common Eastern Hub Operating Systems for
all projects to ensure better Operations and Maintenance in the future,
so high cost for preliminary Operation of manning and training can be
minimized.

QUALIFICATION/EXPERIENCE:
Must have minimum S1 degree or ideally related D3 degree with 10 years experience in oil and gas industry
Should
have experience and knowledge of oil, gas and production facilities
(i.e. ASME, API, ASTM, Cause & Effects and P&IDs)
Actively seek knowledge transfer from outside experts
Must be able to read, write and communicate effectively in English
Demonstrate leadership by actively participating in COPI HSE MS and safety/environmental programs
Must have good analytical thinking and ability to perform with minimum supervision
Must have good interpersonal skills
Must be independent as well as a good team player.
Ability to sustain good working performance under pressure.
High level of computer literacy, and creativity.

OFFSHORE SERVICE ENGINEER

BASIC PURPOSE:
To
ensure offshore compression and power generation units are maintained
at high quality and operated optimum condition by providing guidance
and direction to Offshore Maintenance and Operation personnel.
To observe visually condition and performance of offshore compression and power generation units.
To minimize unscheduled shutdown of offshore compression and power generation units by doing immediate troubleshooting.
To execute recommendation or instruction given by Performance Monitoring team
To inspect, analyze/ interpret and report condition of gas turbines and major/ critical rotating equipment.
To provide QA/QC for major/ critical rotating equipment work at site (onshore and offshore) or at workshop.
To develop and coach Maintenance personnel to be fully aware with high quality inspection.
Position is to replace Rolls Royce Offshore Service Engineers under LTSA contract with national COPI staff

QUALIFICATION/EXPERIENCE:
BS in Mechanical or Instrument engineering with strong in instrument and mechanical system.
At
least 3 years experience in maintenance and operation of in NDT,
boroscope inspection and alignment, gas turbine control, compressor
control, PLC, DCS, SCADA, protection system and other instrumentation.
Familiar with oil and gas process operation and maintenance. Experience in Offshore oil & gas facility is preferred.
Familiar with gas turbine, compressor and major rotating equipment anatomy.
Have extensive troubleshooting experience and sense of urgency.
Good communication in English (speaking & writing)

MAINTENANCE ELECTRICAL ADVISOR

BASIC PURPOSE:
The
Maintenance Support Engineer shall provide technical support to COPI
offshore oil and gas installations operating in the Natuna Sea.
Primarily responsible for providing Electrical expertise including
Heating ventilating Air Conditioning, performing reliability analysis,
fault finding and mentoring to the Offshore Electrical maintenance team.

QUALIFICATION/EXPERIENCE:
Ability to Technical Degree (BSc or MSc in applicable Engineering discipline) or Technical Diploma level (D3/D4)
10
years experience in Electrical Maintenance and Operation preferably in
the offshore Oil and Gas industry. A working knowledge of Gas Turbines
(RR Avons, RB211s ) centrifugal gas compressors, pumps and motors would
be an advantage. Should be knowledgeable in offshore production
operations and maintenance of equipment as well as logistics and
planning.
Demonstrate strong written and oral communication skills in both Indonesian and English.
Proficient computer skills including literacy in Windows and SAP systems.
Knowledgeable in writing and interpreting technical reports.
Self directed, motivated to achieve team goals, customer oriented and capable of working independently with minimal supervision.
Analytical capabilities including problem solving, trouble shooting capability and knowledge of QA/QC procedures.
Ability
to work in an unstructured team environment including surfacing and
resolving conflicts, demonstrating facilitator skills, accepting
accountability, delivering on commitments, engendering trust and
providing peer feedback.
Ability to manage change, drive Continuous Improvement and lead by influence.
Knowledge of Reliability Integrity processes and tools i.e. RCM, Defect Elimination, RCFA, and Pareto.
Knowledge and understanding of Condition Monitoring Techniques.
Mentor /Training and Networking skills.

LAB TECHNICIAN

BASIC PURPOSE
To
take samples, do lab analysis, and report the result safely, correctly,
accurately and timely manner to support offshore operation in
monitoring production/plant performance as well as lab supporting data
for engineering, product specifications and environmental monitoring
purposes

JOB REQUIREMENT
Chemical Analyst High School with
minimum 3 years experience or D3/S1 chemical analyst with minimum 1
year experience at oil & gas industry or relevant industries
Experienced in operate major oil & gas Laboratory equipment and familiar with related lab analysis procedures
Good interpersonal skill and strong team player
Computer literate and good in English
Offshore field base for 2 weeks and beyond if required
Ability to work under diverse cultures and offshore working conditions
Possibility to mobile from one area/field to another area/field
Ability to set-up, install, calibrate, and operate a new lab instrument individually
Troubleshooting of lab instruments

Only those individuals who fully meet the above requirements need apply. Write down THE POSITION TITLE you apply in the subject of your email. Send your application and CV not later than two weeks after the publication of this advertisement to RSCJakartaRecruitment@conocophillips.com